twitter上有一用戶名為趙國劣紳石斑魚大爺@chinashiyu開發了新一代翻牆工具:
gfw.press https://github.com/chinashiyu/gfw.press
推上高手@FWT_T_O_O分析了源碼 https://goo.gl/pYWnmY
使得我甚感興趣,經過在推上和2人交流後,決定嘗試部署一下
部署3proxy工作
測試部署的系統為debian 7 x86 ,vps為openvz 128/128 vswap nat ipv4 share vps
1)先執行系統更新 apt-get update && apt-get upgrade -y
2)安裝需要的元件
apt-get install nano curl build-essential libssl-dev openjdk-7-jre git -y
3)下載gfw.press和3proxy源碼
git clone https://github.com/z3APA3A/3proxy.git
git clone https://github.com/chinashiyu/gfw.press.git
4)轉入3proxy目錄
cd 3proxy/
5)編譯3proxy
make -f Makefile.Linux 等待完成
6) 轉入下一層src目錄
cd src
7) mkdir -p /usr/local/etc/3proxy/bin/ 製造新目錄
8) 安裝3proxy到系統
install 3proxy /usr/local/etc/3proxy/bin/3proxy
install mycrypt /usr/local/etc/3proxy/bin/mycrypt
9)制造3proxy.cfg
touch /usr/local/etc/3proxy/3proxy.cfg
10) 製造3proxy的log文件目錄
mkdir -p /usr/local/etc/3proxy/log/
11)設置權限
chown -R root:root /usr/local/etc/3proxy/
chown -R 65535 /usr/local/etc/3proxy/log/
touch /usr/local/etc/3proxy/3proxy.pid
chown 65535 /usr/local/etc/3proxy/3proxy.pid
12)編輯3proxy.cfg
nano /usr/local/etc/3proxy/3proxy.cfg 內容如下
-------------begin------this line is not the part of 3proxy.cfg-----------
# configure nameserver and nscache which good to save speed, traffic and bandwidth
# Important -> DNS-Server must work. At the moment the Free Google DNS is configured
nscache 8192
nserver 8.8.8.8
timeouts 1 5 30 60 180 1800 15 60
#specify the startup mode as Deamon
daemon
#write pid of current process to file. It can be used to manipulate 3proxy with signals under Unix.
pidfile 3proxy.pid
#Path to configuration file to use on 3proxy restart or to save configuration.
config 3proxy.cfg
#If file monitored changes in modification time or size,
# proxy reloads configuration within one minute.
monitor 3proxy.cfg
# log allows to specify log file location and rotation, D means logfile is created daily
log log/3proxy.log D
logformat "L%d-%m-%Y %H:%M:%S %z %N.%p %E %U %C:%c %R:%r %O %I %h %T"
# We will keep last 30 log files
rotate 30
# user authentication is not needed, we catch tariffic from gfw.press only
# gfw.press has password to auth
auth none
# and allow HTTP and HTTPS traffic.
allow * * * 80-88,8080-8088 HTTP
allow * * * 443,8443 HTTPS
# Sets the proxy on port 3128 with high anonymous flag -a
# You need root priviliges to bind to a port lower than 1000
proxy -i127.0.0.1 -a -p3128
#socks -i127.0.0.1 -a -p1080
flush
# now we needn't any root rights. We can chroot and setgid/setuid.
chroot /usr/local/etc/3proxy/
setgid 65535
setuid 65535
-------------end of 3proxy.cfg--------------------------------------
13)轉到/etc/init.d/目錄,我們需要寫個開機啟動腳本
cd /etc/init.d/
nano 3proxyinit , 腳本內容如下
-----------begin 3proxyinit------------------------------------------
#!/bin/sh
#
### BEGIN INIT INFO
# Provides: 3Proxy
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Initialize 3proxy server
# Description: starts 3proxy
### END INIT INFO
cd /usr/local/etc/3proxy/
case "$1" in
start)
echo Starting 3Proxy
/usr/local/etc/3proxy/bin/3proxy /usr/local/etc/3proxy/3proxy.cfg
;;
stop)
echo Stopping 3Proxy
kill `pidof 3proxy`
;;
*)
echo Usage: \$0 "{start|stop}"
exit 1
esac
exit 0
------------end of 3proxyinit---------------------------
14)使其成為執行檔
chmod +x 3proxyinit
update-rc.d 3proxyinit defaults
15)運行3proxy
cd
/etc/init.d/3proxyinit start
如需要停止便使用 /etc/init.d/3proxyinit stop
以上參考 http://www.tor.eu/?p=685
3proxy的安裝完成,接下來設置gfw.press
1) 轉到gfw.press目錄
cd gfw.press
2) 編輯user.txt
nano user.txt , 其內容是
10006 ChangeMe1
10007 ChangeMe2
10008 ChangeMe3
前面的是端口,後面的是密碼,更改為你喜歡的,格式是端口 空格一個 密碼,每條一行
3)把server.sh改成可執行文件
chmod +x server.sh
4) 執行server.sh
./server.sh &
5) 檢查是否在協同工作
netstat -nlp | grep -i listen
--------scriptshot--------------------------------------------------
root@inethome:~/gfw.press# netstat -nlp | grep -i listen
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 3048/sshd
tcp 0 0 127.0.0.1:3128 0.0.0.0:* LISTEN 9572/3proxy
tcp6 0 0 :::19501 :::* LISTEN 9585/java
tcp6 0 0 :::19502 :::* LISTEN 9585/java
tcp6 0 0 :::19503 :::* LISTEN 9585/java
tcp6 0 0 :::19504 :::* LISTEN 9585/java
tcp6 0 0 :::19505 :::* LISTEN 9585/java
tcp6 0 0 :::22 :::* LISTEN 3048/sshd
---------end---------------------------------------------------------------------------
正常會是這樣,java的進程看開了多少個端口,我只開了5個,因為vps太渣
服務器部署工作已完成
客戶端安裝(window 10)
到http://gfw.press/GFW.Press.msi 下載客戶端,雙擊安裝
chrome 使用SwitchyOmega新建一個情景模式,選http協議
代理伺服器 127.0.0.1 代理埠 3128
運行gfw.press客戶端,填入相關資訊,按確定,chrome轉為代理模式上網
訪問http://whatismyproxy.com 看看是否IP轉變了
後記
感謝推友@FWT_T_O_O解答疑問,感謝趙國劣紳石斑魚大爺@chinashiyu無私奉獻
據說可設為socks代理,只需在gfw.press目錄下增加一個server.json
內容如是
{
"ProxyHost": 127.0.0.1,
"ProxyPort": 1080,
}
在3proxy.cfg中把
#socks -i127.0.0.1 -a -p1080 改為
socks -i127.0.0.1 -a -p1080
我已預先寫了,但時間關係沒有測試,有興趣的推油自行測試
:)
Betway online casino & 100% registration bonus
回覆刪除Betway has 샌즈카지노 a long history of offering a safe and 카지노사이트 secure gaming platform. Their site offers a variety of 온카지노 unique features,